|
|
About
Mefolio, Yet another Mefo.
webmaster (at) dangofactory.net
Subscribe
Subscribe to rss
Links
These are a few of my favourite links.
raelity bytes ;-)
Categories
«
| 2026 |
Jan
Feb
Mar
Apr
May
Jun
Jul
Aug
Sep
Oct
Nov
Dec
| »
|
|
|
603si ... 3PS071
Hardware specifications:
- Qualcomm MSM8909 KMFN60012B
- Samsung KMFN60012B = NAND + LPDDR3 RAM
(2017/3/29 V1.30)
Software specifications:
- 3.10.49-g9297720 build@SSOL Sat Feb 6 12:27:46 CST 2021 Android 6.0.1 Patch 2017?
Disk partitions:
Feelings
= いいこと =
~~やすい~~
今はそんなことないかもしれない。
= わるいこと =
wifiがない
イヤホンジャックがない
モデムとして使えない
ptpできない
MODDING
Firehoseで読み込みができる、が、なぜか書き込みができない。
6.0.1であるが最後のビルドが2021であるためセキュリティーパッチがあたっている可能性がある、が、表示は2017で止まっている。
おそらくTCLからの転用(TCL Pop 4 Plusだとおもう)
Firehoseから読み出しが可能なのでvmlinuxがとれる。debugつき
SETTINGS
[/DEVICES]
permanent link
RTX32 ... YD736
Hardware specifications:
- Freescale M83241G13 (SpeedMind 1000)
- Zentel A3R12E40CBF *2 = 128MB
- ALTERA MAX II (EPM240T100C5N)
- Macronix MX29GL128ELT2I-90G
- Genesys Logic GL852G / USB 2.0
- AU6336 / SD -> USB2.0
- Texas Instruments MP238EC / RS-232C
- Marvell 88E6171R-TFJ2
- MPS MP1541
Software specifications:
Disk partitions:
Feelings
= いいこと =
難燃性。
環境によいlead free, Sn-Ag-Cu。
ファンレス。
電源がいい。
= わるいこと =
CPUのドキュメントが一切ない(がfreebsdが動く)。
なぜか贅沢にCLPDを使っている。
無駄に意識高い。
管理画面に脆弱性がある。
初期コンフィグにパスワードが設定されているのでシリアル経由で1を指定する必要がある。
MODDING
ブートローターとRTOSの両方からledを制御するためにある。
sd/usbからカーネルを起動できるがサムチェックがあって間違えるとboot時に拒否される。
公式ファームの最後の更新は2018/11/1。
デフォルトのコンフィグはシリアルからブートローダーが10秒間まってくれるので何も入っていないconfig1を指定した後、administratorに昇格し、http管理画面から適当に設定をすることで取得できる。
SETTINGS
#show config
# RTX32 Rev.11.02.09 (Thu Nov 1 09:49:58 2018)
# MAC Address : -, -
# Memory 128Mbytes, 2LAN
# main: RTX32 ver=00 serial=- MAC-Address=- MAC-Addres
s=-
# Reporting Date: May 25 22:12:42 2026
login password encrypted *
administrator password encrypted *
login user RICOH_cdl_admin *
login user ricoh *
user attribute ricoh connection=http
security class 2 off off off
console character ascii
login restrict telnet,tftp
ip routing process fast
ip route default gateway dhcp lan2
ip keepalive 1 icmp-echo 10 5 dhcp lan2
ip lan2 address dhcp
ip lan2 secure filter in 101000 101001 101002 101003 101020 101021 101022 10102
3 101024 101025 101030 101032 101080
ip lan2 secure filter out 101010 101011 101012 101013 101020 101021 101022 1010
23 101024 101025 101081 101098 101099 dynamic 101080 101081 101082 101083 10108
4 101085 101098 101099
ip lan2 intrusion detection in on
ip lan2 intrusion detection in default on reject=on
ip lan2 intrusion detection out on
ip lan2 intrusion detection out winny on reject=on
ip lan2 intrusion detection out share on reject=on
ip lan2 intrusion detection out default on reject=on
ip lan2 nat descriptor 200
url lan2 filter out external-database category 10600 10727
netvolante-dns hostname host lan2 server=1 SER--
provider lan1 name LAN:
provider lan2 name PRV/0/1/6/0/0/0:
provider ntpdate ntp.jst.mfeed.ad.jp
ip filter 101000 reject 10.0.0.0/8 * * * *
ip filter 101001 reject 172.16.0.0/12 * * * *
ip filter 101002 reject 192.168.0.0/16 * * * *
ip filter 101003 reject 192.168.1.0/24 * * * *
ip filter 101010 reject * 10.0.0.0/8 * * *
ip filter 101011 reject * 172.16.0.0/12 * * *
ip filter 101012 reject * 192.168.0.0/16 * * *
ip filter 101013 reject * 192.168.1.0/24 * * *
ip filter 101020 reject * * udp,tcp 135 *
ip filter 101021 reject * * udp,tcp * 135
ip filter 101022 reject * * udp,tcp netbios_ns-netbios_ssn *
ip filter 101023 reject * * udp,tcp * netbios_ns-netbios_ssn
ip filter 101024 reject * * udp,tcp 445 *
ip filter 101025 reject * * udp,tcp * 445
ip filter 101030 pass * * icmp * *
ip filter 101031 pass * * established * *
ip filter 101032 pass * * tcp * ident
ip filter 101033 pass * * tcp ftpdata *
ip filter 101034 pass * * tcp,udp * domain
ip filter 101035 pass * * udp domain *
ip filter 101036 pass * * udp * ntp
ip filter 101037 pass * * udp ntp *
ip filter 101080 pass 61.213.52.113-61.213.52.118 192.168.1.3 tcp * 22
ip filter 101081 pass 192.168.1.3 61.213.52.113-61.213.52.118 established * *
ip filter 101098 reject-nolog * * established
ip filter 101099 pass * * * * *
ip filter 500000 restrict * * * * *
ip filter dynamic 101080 * * ftp
ip filter dynamic 101081 * * domain
ip filter dynamic 101082 * * www
ip filter dynamic 101083 * * smtp
ip filter dynamic 101084 * * pop3
ip filter dynamic 101085 * * submission
ip filter dynamic 101098 * * tcp
ip filter dynamic 101099 * * udp
nat descriptor type 200 masquerade
nat descriptor address outer 200 primary
nat descriptor masquerade static 200 1 192.168.1.3 tcp 22
url filter use off
url filter external-database use category netstar
url filter external-database ipaddress access reject
url filter external-database category 10600 reject-nolog 101,102,103,201,202,20
3,204,205,301,302,303,304,401,402,403,404,405,501,502,601,602,603,701,702,801,8
02,901,902,903,904,1001,1002,1003,1004,1005,1006,1007,1008,1101,1102,1103,1104,
1201,1202,1203,1301,1401,1402,1501,1502,1504,1505,1506,1507,1601,1801,1802,1803
,1901,1902,2001,2002,2003,2005,2101,2102,2201,2301,2302,2501 *
url filter external-database category 10727 pass * *
telnetd service off
telnetd host none
dns srcport 10000-19999
dns server dhcp lan2
dns private address spoof on
schedule at 1 / 18:28 * ntpdate ntp.jst.mfeed.ad.jp
schedule at 2 / 06:28 * ntpdate ntp.nict.jp
schedule at 801 +300 * ntpdate ntp.jst.mfeed.ad.jp # 5/25 22:12:27 or in 0 seco
nd
schedule at 802 +600 * ntpdate ntp.nict.jp # 5/25 22:17:27 or in 302 seconds
httpd host lan1
httpd custom-gui user directory=/addon/urlfilter/extdb/category/netstar index=s
u2_default.html
httpd custom-gui user ricoh directory=/ index=index.html administrator=on
netvolante-dns server 1 61.213.52.117
upnp use off
http revision-up url http://www.rtpro.yamaha.co.jp/firmware/revision-up/rtx32.bin http://r.netvolante.jp/rtx32.bin
operation http revision-up permit on
sshd service on
sshd host 61.213.52.113-61.213.52.118
sshd host key generate *
sftpd host 61.213.52.113-61.213.52.118
sftpd password *
[/DEVICES]
permanent link
ウイルスバスター for Home Network .... 8TMSBDM
Hardware specifications:
- 88F6820 (Armada 385) / SoC = ARM Cortex A9 MPCore
- NT5CC128M16JR / DDR3L RAM *2 = 512MB
- H26M31001HPR / eMMC 4GB
- 88E1512 / GbE PHY
- RT6206AH / converter (DCDC)
- WT51F104 / 8bit MCU
- MR25H256 / MRAM
- UTG24P05 / LAN trans
- DC 12V/1A
- Made in Taiwan (HannStar Board) ... 2020/4~2020/9?
Software specifications:
- Marvell version: 2015_T1.0p16 -> U-Boot 2013.01 (Nov 02 2018 - 10:00:07)
- linux-3.10.70-2015_T1.1p7 -> GCC release 20160226-c4af733b in Wed Jan 9 15:16:56 CST 2019
Disk partitions:
- /dev/mmcblk0: PTTYPE="gpt"
- /dev/mmcblk0p1: PARTLABEL="Linux/Windows data" 16384
- /dev/mmcblk0p2: PARTLABEL="Linux/Windows data" 16384
- /dev/mmcblk0p3: PARTLABEL="Linux/Windows data" 16384
- /dev/mmcblk0p4: TYPE="ext4" PARTLABEL="Linux/Windows data" 262144
- /dev/mmcblk0p5: TYPE="ext4" PARTLABEL="Linux/Windows data" 262144
- /dev/mmcblk0p6: TYPE="ext4" PARTLABEL="Linux/Windows data" 262144
- /dev/mmcblk0p7: TYPE="ext4" PARTLABEL="Linux/Windows data" 16384
- /dev/mmcblk0p8: TYPE="ext4" PARTLABEL="Linux/Windows data" 2964463
Feelings
= いいこと =
組み込み機としての性能◎
サーバーとして利用できる
ファンレス。
= わるいこと =
USBがまったく見つからない。
上ブタ側にネジで固定するための突出部がある、ネジを外すときこれがぽろぽろとれる。
設定が雑。多分開発ボードの設定をそのまま転用している。
拡張性×
まつおかしゅうぞうなみにあつい。
eFuseの設定で検証が必須になっている(が多分ubootに脆弱性があるので要確認)
MODDING
底面の四つ角のネジを取ると外れる。
WT51F104にUARTで接続されている。ubootとrcがコマンドを打って勝手に色を変える。
UARTはJP2。 右からRX, 3.3V, GND, TX。
SETTINGS
debootstrap --foreign \
--arch=armhf \
--variant=minbase \
--no-check-gpg \
--no-check-certificate \
buster test http://archive.debian.org/debian/
tar zcf test.tar.gz test/
mv test.tar.gz /var/ftp/pub/
**** START ****
cu -l /dev/ttyU0 -s 115200
setenv bootdelay 2
saveenv
setenv bootargs "console=ttyS0,115200 devtmpfs.mount=1 rdinit=/bin/sh"
boot
mount -t proc proc /proc
mount -t sysfs sysfs /sys
ifconfig eth0 192.168.1.110 netmask 255.255.255.0 up
mknod /dev/mmcblk0p8 b 179 8
mkdir /mnt/system
mount -t ext4 /dev/mmcblk0p8 /mnt/system
cd /mnt/system
rm -fr *
ftpget -u anonymous -p anonymous 192.168.1.5 root.tar.gz pub/test.tar.gz
tar zxvf root.tar.gz
mv test/* .
rm -fr root.tar.gz test
cd
umount /mnt/system/
**** reboot ****
setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p8 rw init=/bin/bash devtmpfs.mount=1 rdinit='
boot
mount -t proc proc proc
mount -t sysfs sysfs /sys
mkdir -p /usr/local/bin
ln -sf /bin/sh /usr/local/bin/bash
cd /var/lib/apt/lists
mv http:__archive.debian.org_debian_dists_buster_InRelease archive.debian.org_debian_dists_buster_InRelease
mv http:__archive.debian.org_debian_dists_buster_Release archive.debian.org_debian_dists_buster_Release
mv http:__archive.debian.org_debian_dists_buster_Release.gpg archive.debian.org_debian_dists_buster_Release.gpg
mv http:__archive.debian.org_debian_dists_buster_main_binary-armhf_Packages archive.debian.org_debian_dists_buster_main_binary-armhf_Packages
cd
./debootstrap/debootstrap --second-stage
**** reboot ****
setenv bootargs "console=ttyS0,115200 devtmpfs.mount=1 rdinit=/bin/sh"
boot
mount -t proc proc proc
mount -t sysfs sysfs sys
ifconfig eth0 192.168.1.110 netmask 255.255.255.0 up
route add default gw 192.168.1.1 eth0
mknod /dev/mmcblk0p8 b 179 8
mkdir /mnt/system
mount -t ext4 /dev/mmcblk0p8 /mnt/system
mount -t proc proc /mnt/system/proc
mount -t sysfs sysfs /mnt/system/sys
chroot /mnt/system/
cat << EOF > /init
#!/bin/sh
mount -t proc proc proc
mount -t sysfs sysfs sys
mount -t devtmpfs devtmpfs dev
exec /sbin/init
EOF
chmod +x init
echo 'nameserver 8.8.8.8' > /etc/resolv.conf
echo "127.0.0.1 localhost" > /etc/hosts
echo "::1 localhost" >> /etc/hosts
date -s "2026-04-03"
apt update
apt install sysvinit-core
apt install net-tools
echo "T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100" >> /etc/inittab
passwd
**** reboot ****
setenv bootargs 'console=ttyS0,115200 root=/dev/mmcblk0p8 rw rdinit= init=/init'
saveenv
RECOMEND: NTP
Marvell>> printenv
SECURE=00000000
CASset=max
FACTORY_MODE=0
FuseFirst=0
FuseSuccess=1
MALLOC_len=5
MPmode=SMP
UserMode=1
autoload=no
baudrate=115200
boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
bootargs=console=ttyS0,115200
bootargs_dflt=$console $nandEcc $mtdparts_lgcy $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=run phyled; mmc reset; mmc read 0x2000000 $devicetree_addr $zImageDtbSize; bootz 0x200c800 - 0x2000000
bootcmd_auto=stage_boot $boot_order
bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
bootcmd_lgcy=tftpboot 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts_lgcy $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootm $loadaddr;
bootdelay=-2
button=released
cacheShare=no
console=console=ttyS0,115200
device_partition=0:1
devicetree_addr=8800
disaMvPnp=no
dnsip=192.168.0.1
eeeEnable=no
enaClockGating=no
enaCpuStream=no
enaFPU=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:5f:26:14
eth1mtu=1500
eth2addr=00:50:43:5f:13:14
eth2mtu=1500
eth3addr=00:50:43:26:13:5f
eth3mtu=1500
ethact=egiga1
ethaddr=0C:83:CC:00:F0:CA
ethmtu=1500
ethprime=egiga0
fdt_addr=2040000
fdt_skip_update=yes
fdtaddr=0x1000000
fdtfile=armada-38x.dtb
fileaddr=2000000
filesize=EB728
gatewayip=192.168.0.1
ide_path=/
image_name=uImage
initrd_name=uInitrd
ipaddr=192.168.0.10
kernel_addr=10864
kernel_addr_r=2080000
lcd0_enable=0
lcd0_params=640x480-16@60
lcd_panel=0
limit_dram_size=yes
loadaddr=0x02000000
loads_echo=0
menucmd=run phyled; mmc reset; mmc read 0x2000000 $devicetree_addr $zImageDtbSize; bootz 0x200c800 - 0x2000000
mtdids=nand0=armada-nand,spi0=spi_flash
mtdparts='mtdparts=armada-nand:8m(boot)ro,8m@8m(kernel),-(rootfs);spi1.0:4m(boot),-(spi-rootfs);pxa3xx_nand-0:8m(boot)ro,8m@8m(kernel),-(rootfs)'
mtdparts_lgcy='mtdparts=armada-nand:8m(boot)ro,8m@8m(kernel),-(rootfs);spi_flash:4m(boot),-(spi-rootfs);pxa3xx_nand-0:8m(boot)ro,8m@8m(kernel),-(rootfs)'
mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
mv_pon_addr=00:50:43:14:13:5f
nandEcc=nfcConfig=8bitecc
netbsd_en=no
netmask=255.255.255.0
netretry=no
pcieTune=no
pexMode=RC
phyled=phyWrite 0x0 0x16 0x3;phyWrite 0x0 0x10 0xf377;phyWrite 0x0 0x11 0x5;phyWrite 0x0 0x16 0x0
pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
ramdisk_addr_r=2880000
rootpath=/srv/nfs/
run_script=no
sata_delay_reset=0
sata_dma_mode=yes
script_addr_r=3000000
script_name=boot.scr
sd_detection_dat3=no
serverip=192.168.0.4
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts_lgcy root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
usb0Mode=host
usbActive=0
usbType=2
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81
zImageDtbSize=2f92
Environment size: 3973/524284 bytes
BootROM - 1.73
Booting from MMC
BootROM: RSA Public key verification PASSED
BootROM: CSK block signature verification PASSED
BootROM: Boot header signature verification PASSED
BootROM: Flash ID verification PASSED
BootROM: Box ID verification PASSED
BootROM: JTAG is enabled
BootROM: Image checksum verification PASSED
BootROM: Boot image signature verification PASSED
aaaaaaaaaaaaaaaaaaaagd->baudrate=115200
whoAmI()=0
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** LOADER **
U-Boot 2013.01 (Nov 02 2018 - 10:00:07) Marvell version: 2015_T1.0p16
Board: A38x-Customer-Board-0
SoC: MV88F6820 Rev
running 2 CPUs
CPU: ARM Cortex A9 MPCore (Rev 1) LE
CPU 0
CPU @ 1332 [MHz]
L2 @ 666 [MHz]
TClock @ 200 [MHz]
DDR3 @ 666 [MHz]
DDR3 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM: 512 MiB
NAND: mvNfcInit() failed.
0 MiB
MMC: mv_sdh: 0
Map: Code: 0x1feec000:0x1ffa1920
BSS: 0x1ffefc38
Stack: 0x1f96bf20
Heap: 0x1f96c000:0x1feec000
U-Boot Environment: 0x00300000:0x00380000 (MMC)
Board configuration detected:
Net:
| port | Interface | PHY address |
|--------|-----------|--------------|
| egiga1 | SGMII | 0x00 |
, egiga1
uart_2_command 3
b4 mv_serial_init_2
b4 mv_serial_init_2
b4 mv_serial_init_2
b4 mv_serial_init_2
mv_serial_init_2
mv_serial_init_2
mv_serial_init_2
mv_serial_init_2
mv_serial_init_2
mv_serial_init_2
xfax03x03x0x0x0xfb
xfax03x03x0x0x0xfb
length = 18
tmp=fa
cmd[0]=0xfa
tmp=03
cmd[1]=0x3
tmp=03
cmd[2]=0x3
tmp=0
cmd[3]=0x0
tmp=0
cmd[4]=0x0
tmp=0
cmd[5]=0x0
tmp=fb
cmd[6]=0xfb
uart_2_command 2
xfax03x02x07x07x00xfb
xfax03x02x07x07x00xfb
length = 21
tmp=fa
cmd[0]=0xfa
tmp=03
cmd[1]=0x3
tmp=02
cmd[2]=0x2
tmp=07
cmd[3]=0x7
tmp=07
cmd[4]=0x7
tmp=00
cmd[5]=0x0
tmp=fb
cmd[6]=0xfb
reset button detect
button env=released
High
addrDtb = 34816
szImageSizeValue = 2f2c
zImageDtbSizeInHex=2f92
Hit any key to stop autoboot: 0
SECURE = 00000001
Value(s) obtained from eFuse "SECURE" [0X0F9180]:
00000001
tmp = 00000001
value = 00000001
mmc - MMC sub system
Usage:
mmc mmc read addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devicesmmc setdsr - set DSR register value
MMC read: dev # 0, block # 34816, count 12178 ... 12178 blocks read: OK
zImageSize=2f2c
start to do sha1 0x2000000
6E 55 ED B5 66 54 1F F3 2A 4C 05 81 7B 93 56 92 AB 80 F7 E2
46 21 3a f5 d2 57 6b b8 18 98 07 90 72 f0 e8 87
c8 3d 8d 63 54 57 85 62 58 00 11 eb 38 42 83 05
74 d6 f1 83 f7 63 4c 06 c0 bb 25 a1 c5 2e f8 23
50 1b 25 cd 75 8c aa e6 e0 91 fc 13 72 aa 28 11
98 f8 53 55 75 09 c2 b9 6a c5 c3 eb 01 3c b4 d9
be 5e 86 af 51 d1 81 09 d7 43 f2 80 44 18 cd ec
80 d6 f6 6b 44 05 5a 2e ee e6 ce 64 49 20 56 5a
61 c5 66 5a 37 12 c1 13 d9 0d 47 f6 09 2b 11 8b
b4 92 76 43 b7 09 6e 8e 19 fa a3 df e1 ef 70 4b
18 a2 3c 04 7a 8e c1 12 5e fa 87 0a cf 6c 67 6f
e8 81 a6 87 41 9a fe 9e e9 6e 8f 5a 72 32 6c 5e
c2 86 1b d0 72 b9 09 e8 9f 47 54 34 07 3e a7 a8
21 93 7d 0b 56 70 a2 6b f3 47 e7 0d 82 a0 ab 63
47 66 fa 4c 29 2d b5 4f a2 4f 04 67 f0 98 a3 e8
e4 ff 4d c3 30 a3 64 1a dd 85 35 6a 80 70 20 ae
57 35 60 d8 71 ab f4 b1 0c 2b d2 7d cd 7d 09 5c rsa.len=256
. OK
## Flattened Device Tree blob at 02000000
Booting using the fdt blob at 0x02000000
Loading Device Tree to 00ff9000, end 00fffdff ... OK
Skipping Device Tree update ('fdt_skip_update' = yes)
Limit DDR size at 3GB due to power of 2 requirement of Address decoding
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.70 (root@cptmacmillan-OptiPlex-9020) (gcc version 4.6.4 (Marvell GCC release 20160226-c4af733b 64K MAXPAGESIZE ALIGN) ) #1 SMP Wed Jan 9 15:16:56 CST 2019
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Marvell Armada 380/381/382/383/384/385/388 (Device Tree), model: Marvell Armada 385 Development Board
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c140a000 s7168 r8192 d13312 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttyS0,115200
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 506888k/506888k available, 17400k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xfff00000 ( 503 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc08dc000 (9040 kB)
.init : 0xc08dc000 - 0xc0bbbc00 (2943 kB)
.data : 0xc0bbc000 - 0xc0c13be0 ( 351 kB)
.bss : 0xc0c13be0 - 0xc0c74240 ( 386 kB)
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
NR_IRQS:16 nr_irqs:16 16
LSP version: linux-3.10.70-2015_T1.1p7
sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B
Console: colour dummy device 80x30
Calibrating delay loop... 2655.84 BogoMIPS (lpj=13279232)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0xc06cbd60 - 0xc06cbdb8
mvebu-pmsu: Initializing Power Management Service Unit
Initializing CPU Reset module
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (5311.69 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0xA
xor: measuring software checksum speed
arm4regs : 2361.600 MB/sec
8regs : 1594.800 MB/sec
32regs : 1360.000 MB/sec
xor: using function: arm4regs (2361.600 MB/sec)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
irq: Cannot allocate irq_descs @ IRQ194, assuming pre-allocated
irq: Cannot allocate irq_descs @ IRQ226, assuming pre-allocated
bio: create slab <bio-0> at 0
raid6: int32x1 169 MB/s
raid6: int32x2 245 MB/s
raid6: int32x4 312 MB/s
raid6: int32x8 316 MB/s
raid6: using algorithm int32x8 (316 MB/s)
raid6: using intx1 recovery algorithm
mvebu-pcie pcie-controller.3: PCIe0.0: link down
mvebu-pcie pcie-controller.3: PCIe1.0: link down
mvebu-pcie pcie-controller.3: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers enabled
PCI: bus2: Fast back to back transfers enabled
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
PCI: enabling device 0000:00:01.0 (0140 -> 0143)
PCI: enabling device 0000:00:02.0 (0140 -> 0143)
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
Switching to clocksource armada_370_xp_clocksource
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(1.110:1): initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.30 [Flags: R/O].
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
bio: create slab <bio-1> at 1
Btrfs loaded
msgmni has been set to 990
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
mv_xor f1060800.xor: Marvell shared XOR driver
mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
mv_xor f1060800.xor: freeing 1 in use descriptors!
mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
mv_xor f1060900.xor: Marvell shared XOR driver
mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
mv_xor f1060900.xor: freeing 1 in use descriptors!
mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A
console [ttyS0] enabled
f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 45) is a 16550A
TM button driver installed
loop: module loaded
ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi0 : ahci_mv_platform
scsi1 : ahci_mv_platform
ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58
ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58
m25p80 spi0.0: found mr25h256, expected w25q32
m25p80 spi0.0: mr25h256 (32 Kbytes)
SoC: model = 0x6820, revision = 0xa
mvPncVirtBase = 0xe0c00000, pncTcamSize = 1024
o 3 Giga ports supported
o SKB recycle supported for SWF (Disabled)
o NETA acceleration mode 4
o BM supported for CPU: 4 BM pools
o PnC supported (Enabled)
o RX Queue support: 8 Queues * 256 Descriptors
o TX Queue support: 8 Queues * 532 Descriptors
o GSO supported
o GRO supported
o Receive checksum offload supported
o Transmit checksum offload supported
o Driver ERROR statistics enabled
o Driver INFO statistics enabled
o Driver DEBUG statistics enabled
port #1: is_sgmii=1, is_rgmii=0, phy_addr=0
o Loading network interface(s) for port #1: cpu_mask=0x3, tx_csum_limit=2048
o Port 1 is connected to Linux netdevice
o eth0, ifindex = 2, GbE port = 1
giga p=1: mtu=1500, mac=0c:83:cc:00:f0:ca (hw config)
libphy: orion_mdio_bus: probed
mdio_bus f1072004.mdio-mi: cannot get PHY at address 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-orion: EHCI orion driver
orion-ehci f1058000.usb: EHCI Host Controller
orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
orion-ehci f1058000.usb: irq 50, io mem 0xf1058000
orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd f10f0000.usb3: xHCI Host Controller
xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd f10f0000.usb3: xHCI Host Controller
xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f10f8000.usb3: xHCI Host Controller
xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd f10f8000.usb3: xHCI Host Controller
xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
i2c /dev entries driver
armada_thermal f10e4078.thermal: Overheat threshold between 92..107
orion_wdt: Initial timeout 171 sec
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
dm_crypt using the OCF package.
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
sdhci-pltfm: SDHCI platform and OF driver helper
armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2
armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: int_coalescing(1)
armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources threshold 0x2, threshold_time 0xfffff
mvCesaInit: channels=2, session=640, queue=256
armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode
cesadev_init(c08f97e8)
usbcore: registered new interface driver usbhid
mmc0: BKOPS_EN bit is not set
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 H4G2a 3.64 GiB
mmcblk0boot0: mmc0:0001 H4G2a partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 H4G2a partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 H4G2a partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
mmcblk0boot1: unknown partition table
mmcblk0boot0: unknown partition table
usbhid: USB HID core driver
Loading Marvell spi device
cs42l51-codec 0-004a: failed to read I2C
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (7920 buckets, 31680 max)
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
regulator-dummy: disabling
mvebu-rtc f10a3800.rtc: setting system clock to 2106-02-07 06:28:15 UTC (4294967295)
ALSA device list:
No soundcards found.
Freeing unused kernel memory: 2940K (c08dc000 - c0bbb000)
Diamond : initramfs start
Diamond : Mounting procfs...
Diamond : Mounting sysfs...
---------------------------------------------------------
---------------------------------------------------------
Linux (none) 3.10.70 #1 SMP Wed Jan 9 15:16:56 CST 2019 armv7l GNU/Linux
---------------------------------------------------------
---------------------------------------------------------
environment (524288 bytes)
Read 0x80000 bytes at 0x300000 on /dev/mmcblk0boot0
Diamond : devicetree_addr=8800
Diamond : MOUNT_SYSTEM=/dev/mmcblk0p5
Diamond : Mounting /dev/mmcblk0p5...
EXT4-fs (mmcblk0p5): recovery complete
EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
shaFileSize = 19501056
94 24 f4 00 74 56 70 ad a2 5f 0f e1 c3 4c 61 b7
27 80 82 b8 ef 9e c5 41 77 fa f4 10 c8 d1 ac ef
ca b1 a2 fb 4d 7c 9e 26 a6 47 85 0f 83 af db 3a
f8 3f 93 b3 df 73 87 f9 bf 45 eb 96 6b f9 b2 c0
9b 9d e3 d4 10 c8 93 9a cb 68 dc 95 9a 50 56 27
8a a5 eb 65 d7 10 42 18 af d0 7b d5 4b db 8a 19
e3 06 c7 4b ce df 2e a3 54 89 6c 1b 0e fd c7 c2
a9 d6 21 28 5f 4f 62 1a 65 17 ed ad 74 f4 3a 9e
9c b3 13 ff 93 37 80 65 7c 6a 71 45 78 0e 01 ff
5d 81 62 11 f6 c0 c7 9d c7 9c 28 5a a5 4d ad e0
02 3a 95 a6 e8 46 18 e6 16 02 35 b2 d1 ea fa bf
7b 55 d4 2b 8b de ab 7e 3d c8 cb ce 2e e3 07 27
8e 13 19 bb 31 bc b5 25 2d 29 cd f6 1b ae eb 24
7c 66 22 8e 0f 2b 55 ed a0 16 5a dd e7 9c 8e 31
0d 27 69 7c d8 a9 81 86 56 6f 20 cc a9 0c b8 44
02 8d 73 10 4e 9b 25 5d 41 4a 5a eb 48 23 80 7a
. Verifying the RSA/SHA-1 signature
start to do sha1
27 7C 52 4C 2C 7E 74 91 4D F1 3B 31 82 BD E6 F9 B4 F0 06 35
rsa.len=256
. OK
Diamond : Verify Squashfs:0
Diamond : Check and create dev/ttyS0 and dev/tts/0
rootfs on / type rootfs (rw)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/mmcblk0p5 on /mnt/system type ext4 (rw,relatime,data=ordered)
/dev/loop0 on /mnt/rootfs type squashfs (ro,relatime)
tmpfs on /mnt/rootfs/dev type tmpfs (rw,relatime,size=2048k)
Diamond : /sbin/init found on /mnt/rootfs, switching rootfs ...
environment (524288 bytes)
Read 0x80000 bytes at 0x300000 on /dev/mmcblk0boot0
mknod: /dev/tm_button: File exists
Diamond : Mounting /dev/mmcblk0p7...
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Diamond : Mount /dev/mmcblk0p7 as /secure OK
Diamond : UserMode
Diamond : Checking Opt file system integrity...
Diamond : Diamond : FSCKCODE=1
Diamond : Mounting /dev/mmcblk0p8...
EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
Diamond : Mount /dev/mmcblk0p8 as /opt OK
Diamond : run TmResetButtond
Starting logging: OK
Starting watchdog...
Initializing random number generator... read-only file system detected...done
Starting network...
pool #1: pkt_size=1536, buf_size=1600 - 2048 of 2048 buffers added
eth0: link up
eth0: started
Detect DHCP mode...
Starting runspec...
device eth0 entered promiscuous mode
copying table from file '/tmp/incrond_coredump_rule'
Started runspec...
updated_monitor (1418): /proc/1422/oom_adj is deprecated, please use /proc/1422/oom_score_adj instead.
/ # cat init
#!/bin/sh
PATH=/bin:/sbin:/usr/bin:/usr/sbin
export PATH
sleep 3
echo "Diamond : initramfs start"
echo "Diamond : Mounting procfs..."
mount -t procfs /proc
echo "Diamond : Mounting sysfs..."
mount -t sysfs /sys
mdev -s
stty -onlcr -icrnl -F /dev/ttyS1 57600
#KERNEL_VER=`uname -r`
#MOD_PATH=/lib/modules/$KERNEL_VER
echo ---------------------------------------------------------
echo ---------------------------------------------------------
uname -a
echo ---------------------------------------------------------
echo ---------------------------------------------------------
mkdir -p /mnt/rootfs
mkdir -p /mnt/system
check_and_set_dev()
{
mkdir -p $SWITCH_ROOTFS/dev
mount -t tmpfs -o size=2m tmpfs $SWITCH_ROOTFS/dev
mkdir -p $SWITCH_ROOTFS/dev/pts
mkdir -p $SWITCH_ROOTFS/dev/tts
echo "Diamond : Check and create dev/ttyS0 and dev/tts/0"
if [ ! -e $SWITCH_ROOTFS/dev/tts/0 ] ; then ln -sf /dev/ttyS0 $SWITCH_ROOTFS/dev/tts/0 ; fi
if [ ! -e $SWITCH_ROOTFS/dev/ttyS0 ] ; then mknod $SWITCH_ROOTFS/dev/ttyS0 c 4 64 ; fi
}
find_init_and_switch_root()
{
check_and_set_dev
mount
cd $SWITCH_ROOTFS
if [ -x sbin/init ]; then
echo "Diamond : /sbin/init found on $SWITCH_ROOTFS, switching rootfs ..."
exec switch_root $SWITCH_ROOTFS /sbin/init
fi
if [ -x bin/sh ]; then
echo "Diamond : /bin/sh found on $SWITCH_ROOTFS, switching rootfs ..."
exec switch_root $SWITCH_ROOTFS /bin/sh
fi
echo "Diamond : Could not find bootable filesystem on $SWITCH_ROOTFS..."
cd /
umount -f $SWITCH_ROOTFS/dev
umount -f $SWITCH_ROOTFS
}
DEVICE_ADDR=`fw_printenv devicetree_addr | cut -d = -f 2`
echo Diamond : devicetree_addr=$DEVICE_ADDR
if [ x$DEVICE_ADDR = x800 ] ; then
MOUNT_SYSTEM=/dev/mmcblk0p4
echo "Diamond : MOUNT_SYSTEM=$MOUNT_SYSTEM"
elif [ x$DEVICE_ADDR = x8800 ] ; then
MOUNT_SYSTEM=/dev/mmcblk0p5
echo "Diamond : MOUNT_SYSTEM=$MOUNT_SYSTEM"
elif [ x$DEVICE_ADDR = x10800 ] ; then
MOUNT_SYSTEM=/dev/mmcblk0p6
echo "Diamond : MOUNT_SYSTEM=$MOUNT_SYSTEM"
else
MOUNT_SYSTEM=/dev/mmcblk0p4
echo "Diamond : MOUNT_SYSTEM is unknown , set to $MOUNT_SYSTEM"
#exec /bin/sh
fi
echo "Diamond : Mounting $MOUNT_SYSTEM..."
if mount -t ext4 $MOUNT_SYSTEM /mnt/system ; then
if [ -r /mnt/system/rootfs.squashfs ] ; then
rsa_verify_squashfs /mnt/system/rootfs.squashfs
result=$?
echo "Diamond : Verify Squashfs:$result"
if [ 0 -eq $result ] ; then
SWITCH_ROOTFS=/mnt/rootfs
losetup /dev/loop0 /mnt/system/rootfs.squashfs
if mount -t squashfs /dev/loop0 $SWITCH_ROOTFS ; then
find_init_and_switch_root
umount $SWITCH_ROOTFS
fi
fi
fi
echo "Diamond : /mnt/system/rootfs.squashfs is not usable"
echo -n -e '\xfa\x03\x03\x7\x7\x0\xfb' > /dev/ttyS1 # green red blink 700ms
SWITCH_ROOTFS=/mnt/system
find_init_and_switch_root
echo "Diamond : /mnt/system is not usable"
else
echo -n -e '\xfa\x03\x03\x7\x7\x0\xfb' > /dev/ttyS1 # green red blink 700ms
echo "Diamond : Mount failed..."
fi
# Cannot find any suitable rootfs, use the current rootfs ...
echo "Diamond : Fallback to using rootfs from initramfs..."
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.10.70 (root@cptmacmillan-OptiPlex-9020) (gcc version 4.6.4 (Marvell GCC release 20160226-c4af733b 64K MAXPAGESIZE ALIGN) ) #1 SMP Wed Jan 9 15:16:56 CST 2019
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Marvell Armada 380/381/382/383/384/385/388 (Device Tree), model: Marvell Armada 385 Development Board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0c126c0, node_mem_map c1000000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c140a000 s7168 r8192 d13312 u32768
[ 0.000000] pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p8 rw rdinit= init=/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 506888k/506888k available, 17400k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xe0800000 - 0xfff00000 ( 503 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc08dc000 (9040 kB)
.init : 0xc08dc000 - 0xc0bbbc00 (2943 kB)
.data : 0xc0bbc000 - 0xc0c13be0 ( 351 kB)
.bss : 0xc0c13be0 - 0xc0c74240 ( 386 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000]
LSP version: linux-3.10.70-2015_T1.1p7
[ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
[ 0.000000] L310 cache controller enabled
[ 0.000000] l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B
[ 0.000000] Console: colour dummy device 80x30
[ 0.000461] Calibrating delay loop... 2655.84 BogoMIPS (lpj=13279232)
[ 0.060029] pid_max: default: 32768 minimum: 301
[ 0.060077] Security Framework initialized
[ 0.060099] Mount-cache hash table entries: 512
[ 0.060398] CPU: Testing write buffer coherency: ok
[ 0.060505] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060538] Setting up static identity map for 0xc06cbd60 - 0xc06cbdb8
[ 0.060685] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.060717] Initializing CPU Reset module
[ 0.061277] CPU1: Booted secondary processor
[ 0.120474] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.120546] Brought up 2 CPUs
[ 0.120552] SMP: Total of 2 processors activated (5311.69 BogoMIPS).
[ 0.120553] CPU: All CPU(s) started in SVC mode.
[ 0.120822] devtmpfs: initialized
[ 0.123171] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0xA
[ 0.123314] xor: measuring software checksum speed
[ 0.220356] arm4regs : 2361.600 MB/sec
[ 0.320256] 8regs : 1594.800 MB/sec
[ 0.420157] 32regs : 1360.000 MB/sec
[ 0.420159] xor: using function: arm4regs (2361.600 MB/sec)
[ 0.420163] pinctrl core: initialized pinctrl subsystem
[ 0.420401] regulator-dummy: no parameters
[ 0.420547] NET: Registered protocol family 16
[ 0.421092] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.423084] irq: Cannot allocate irq_descs @ IRQ194, assuming pre-allocated
[ 0.423435] irq: Cannot allocate irq_descs @ IRQ226, assuming pre-allocated
[ 0.435294] bio: create slab at 0
[ 0.600077] raid6: int32x1 169 MB/s
[ 0.769839] raid6: int32x2 245 MB/s
[ 0.939771] raid6: int32x4 312 MB/s
[ 1.109511] raid6: int32x8 316 MB/s
[ 1.109514] raid6: using algorithm int32x8 (316 MB/s)
[ 1.109516] raid6: using intx1 recovery algorithm
[ 1.109750] mvebu-pcie pcie-controller.3: PCIe0.0: link down
[ 1.109770] mvebu-pcie pcie-controller.3: PCIe1.0: link down
[ 1.109878] mvebu-pcie pcie-controller.3: PCI host bridge to bus 0000:00
[ 1.109884] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 1.109890] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 1.109895] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.109912] pci 0000:00:01.0: [11ab:7846] type 01 class 0x060400
[ 1.110019] pci 0000:00:02.0: [11ab:7846] type 01 class 0x060400
[ 1.110123] PCI: bus0: Fast back to back transfers disabled
[ 1.110128] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.110134] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.110216] PCI: bus1: Fast back to back transfers enabled
[ 1.110222] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.110307] PCI: bus2: Fast back to back transfers enabled
[ 1.110313] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.110334] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.110341] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 1.110347] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
[ 1.110352] PCI: enabling device 0000:00:02.0 (0140 -> 0143)
[ 1.110683] vgaarb: loaded
[ 1.110933] SCSI subsystem initialized
[ 1.111109] libata version 3.00 loaded.
[ 1.111362] usbcore: registered new interface driver usbfs
[ 1.111420] usbcore: registered new interface driver hub
[ 1.111493] usbcore: registered new device driver usb
[ 1.111749] pps_core: LinuxPPS API ver. 1 registered
[ 1.111752] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 1.111794] PTP clock support registered
[ 1.112128] Advanced Linux Sound Architecture Driver Initialized.
[ 1.112695] Switching to clocksource armada_370_xp_clocksource
[ 1.112718] cfg80211: Calling CRDA to update world regulatory domain
[ 1.118162] NET: Registered protocol family 2
[ 1.118544] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.118585] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.118625] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.118651] TCP: reno registered
[ 1.118656] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.118668] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.118784] NET: Registered protocol family 1
[ 1.118914] RPC: Registered named UNIX socket transport module.
[ 1.118916] RPC: Registered udp transport module.
[ 1.118918] RPC: Registered tcp transport module.
[ 1.118920] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.118932] PCI: CLS 64 bytes, default 64
[ 1.130039] audit: initializing netlink socket (disabled)
[ 1.130059] type=2000 audit(1.110:1): initialized
[ 1.130491] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.130604] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.130646] NTFS driver 2.1.30 [Flags: R/O].
[ 1.130666] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
[ 1.130772] bio: create slab at 1
[ 1.130966] Btrfs loaded
[ 1.130976] msgmni has been set to 990
[ 1.131408] async_tx: api initialized (async)
[ 1.131473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.131477] io scheduler noop registered
[ 1.131479] io scheduler deadline registered
[ 1.131492] io scheduler cfq registered (default)
[ 1.132016] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 1.132295] mv_xor f1060800.xor: Marvell shared XOR driver
[ 1.173089] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
[ 1.203068] mv_xor f1060800.xor: freeing 1 in use descriptors!
[ 1.203075] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
[ 1.203992] mv_xor f1060900.xor: Marvell shared XOR driver
[ 1.243070] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
[ 1.273070] mv_xor f1060900.xor: freeing 1 in use descriptors!
[ 1.273078] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
[ 1.306331] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.327304] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A
[ 1.891833] console [ttyS0] enabled
[ 1.914405] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 45) is a 16550A
[ 1.920633] TM button driver installed
[ 1.925142] loop: module loaded
[ 1.927271] ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.934800] ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.942915] scsi0 : ahci_mv_platform
[ 1.945389] scsi1 : ahci_mv_platform
[ 1.947808] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58
[ 1.954459] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58
[ 1.963488] m25p80 spi0.0: found mr25h256, expected w25q32
[ 1.967693] m25p80 spi0.0: mr25h256 (32 Kbytes)
[ 1.972366] SoC: model = 0x6820, revision = 0xa
[ 1.975690] mvPncVirtBase = 0xe0c00000, pncTcamSize = 1024
[ 1.979887] o 3 Giga ports supported
[ 1.982340] o SKB recycle supported for SWF (Disabled)
[ 1.986370] o NETA acceleration mode 4
[ 1.988997] o BM supported for CPU: 4 BM pools
[ 1.992322] o PnC supported (Enabled)
[ 1.994871] o RX Queue support: 8 Queues * 256 Descriptors
[ 1.999243] o TX Queue support: 8 Queues * 532 Descriptors
[ 2.003619] o GSO supported
[ 2.005286] o GRO supported
[ 2.006954] o Receive checksum offload supported
[ 2.010453] o Transmit checksum offload supported
[ 2.014047] o Driver ERROR statistics enabled
[ 2.017284] o Driver INFO statistics enabled
[ 2.020434] o Driver DEBUG statistics enabled
[ 2.024889] port #1: is_sgmii=1, is_rgmii=0, phy_addr=0
[ 2.028858] o Loading network interface(s) for port #1: cpu_mask=0x3, tx_csum_limit=2048
[ 2.036063] o Port 1 is connected to Linux netdevice
[ 2.040957] o eth0, ifindex = 2, GbE port = 1
[ 2.047809] giga p=1: mtu=1500, mac=0c:83:cc:00:f0:ca (hw config)
[ 2.053327] libphy: orion_mdio_bus: probed
[ 2.056300] mdio_bus f1072004.mdio-mi: cannot get PHY at address 1
[ 2.062621] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.068446] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.072985] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.077531] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.082286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087560] ehci-pci: EHCI PCI platform driver
[ 2.090773] ehci-orion: EHCI orion driver
[ 2.093572] orion-ehci f1058000.usb: EHCI Host Controller
[ 2.097693] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 2.104049] orion-ehci f1058000.usb: irq 50, io mem 0xf1058000
[ 2.122737] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 2.127691] hub 1-0:1.0: USB hub found
[ 2.130153] hub 1-0:1.0: 1 port detected
[ 2.133071] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 2.137108] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[ 2.143445] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
[ 2.148129] xHCI xhci_add_endpoint called for root hub
[ 2.148132] xHCI xhci_check_bandwidth called for root hub
[ 2.148226] hub 2-0:1.0: USB hub found
[ 2.150686] hub 2-0:1.0: 1 port detected
[ 2.153398] xhci-hcd f10f0000.usb3: xHCI Host Controller
[ 2.157428] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[ 2.163825] xHCI xhci_add_endpoint called for root hub
[ 2.163828] xHCI xhci_check_bandwidth called for root hub
[ 2.163915] hub 3-0:1.0: USB hub found
[ 2.166375] hub 3-0:1.0: 1 port detected
[ 2.169090] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.173132] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[ 2.179453] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
[ 2.184116] xHCI xhci_add_endpoint called for root hub
[ 2.184119] xHCI xhci_check_bandwidth called for root hub
[ 2.184201] hub 4-0:1.0: USB hub found
[ 2.186660] hub 4-0:1.0: 1 port detected
[ 2.189350] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.193392] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[ 2.199781] xHCI xhci_add_endpoint called for root hub
[ 2.199783] xHCI xhci_check_bandwidth called for root hub
[ 2.199868] hub 5-0:1.0: USB hub found
[ 2.202327] hub 5-0:1.0: 1 port detected
[ 2.205190] usbcore: registered new interface driver usb-storage
[ 2.210076] mousedev: PS/2 mouse device common for all mice
[ 2.214996] mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[ 2.272840] i2c /dev entries driver
[ 2.287534] armada_thermal f10e4078.thermal: Overheat threshold between 92..107
[ 2.294105] orion_wdt: Initial timeout 171 sec
[ 2.297314] md: raid0 personality registered for level 0
[ 2.301338] md: raid1 personality registered for level 1
[ 2.305383] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.305386] md: raid6 personality registered for level 6
[ 2.305388] md: raid5 personality registered for level 5
[ 2.305389] md: raid4 personality registered for level 4
[ 2.321622] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.321710] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.332946] dm_crypt using the OCF package.
[ 2.335836] cpuidle: using governor ladder
[ 2.338697] sdhci: Secure Digital Host Controller Interface driver
[ 2.343601] sdhci: Copyright(c) Pierre Ossman
[ 2.346764] mmc0: no vqmmc regulator found
[ 2.349568] mmc0: no vmmc regulator found
[ 2.392719] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 2.399046] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.403506] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2
[ 2.411550] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: int_coalescing(1)
[ 2.419339] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources threshold 0x2, threshold_time 0xfffff
[ 2.427766] mvCesaInit: channels=2, session=640, queue=256
[ 2.443171] armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode
[ 2.450882] cesadev_init(c08f97e8)
[ 2.453297] usbcore: registered new interface driver usbhid
[ 2.457581] usbhid: USB HID core driver
[ 2.460193] Loading Marvell spi device
[ 2.469008] cs42l51-codec 0-004a: failed to read I2C
[ 2.473235] Netfilter messages via NETLINK v0.30.
[ 2.476653] nfnl_acct: registering with nfnetlink.
[ 2.480179] nf_conntrack version 0.5.0 (7920 buckets, 31680 max)
[ 2.485171] xt_time: kernel timezone is -0000
[ 2.488304] ipip: IPv4 over IPv4 tunneling driver
[ 2.492082] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.496240] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 2.501339] arp_tables: (C) 2002 David S. Miller
[ 2.504703] TCP: cubic registered
[ 2.506754] NET: Registered protocol family 10
[ 2.510327] mip6: Mobile IPv6
[ 2.512011] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.516639] NET: Registered protocol family 17
[ 2.519833] Bridge firewalling registered
[ 2.522561] 8021q: 802.1Q VLAN Support v1.8
[ 2.522563] mmc0: BKOPS_EN bit is not set
[ 2.528241] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.535185] regulator-dummy: disabling
[ 2.538065] mvebu-rtc f10a3800.rtc: setting system clock to 2106-02-07 06:28:15 UTC (4294967295)
[ 2.545640] ALSA device list:
[ 2.547313] No soundcards found.
[ 2.549429] mmc0: new high speed MMC card at address 0001
[ 2.553801] mmcblk0: mmc0:0001 H4G2a 3.64 GiB
[ 2.557128] mmcblk0boot0: mmc0:0001 H4G2a partition 1 4.00 MiB
[ 2.561845] mmcblk0boot1: mmc0:0001 H4G2a partition 2 4.00 MiB
[ 2.566590] mmcblk0rpmb: mmc0:0001 H4G2a partition 3 4.00 MiB
[ 2.577716] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[ 2.585576] mmcblk0boot1: unknown partition table
[ 2.592636] mmcblk0boot0: unknown partition table
[ 2.596286] md: Waiting for all devices to be available before autodetect
[ 2.601792] md: If you don't use raid, use raid=noautodetect
[ 2.606503] md: Autodetecting RAID arrays.
[ 2.609306] md: Scanned 0 and added 0 devices.
[ 2.612456] md: autorun ...
[ 2.613960] md: ... autorun DONE.
[/DEVICES]
permanent link
|
|